esigned to rewind with just a push of a button for easy storage and no tangling
Features super strong holding power and precise tension adjustment
Coated S-Hooks to prevent marring and scratching cargo
Load capacity of 1100 pounds
3300 pound break strength capacity
Full Body Adjustable Work Positioning Sit Harness with Padded Leg Strap & Shoulder Strap, one Ventral D-Ring, one Sternal D-Ring, one Dorsal Attachment D-Ring, two Lateral D-Rings on the Sides, 2 m Poly-amide Lanyard & Hook PN121 Permanently Attached
Adaptability : Adjustable Shoulder, Thigh Straps and waist belt
Convenience : An Ideal combination of
We Distributors a complete rage of Fall Protection Equipment like
Full Body Harness
Belt for Work Positioning, Restraint and work positioning lanyards
Anchorage Devices- Requirements & Tests
Guided Type Fall Arrester including a flexible Anchorage Line
Retractable Type Fall Arrester
KARAM provides Steel Hooks & Connectors having screw locking, twist-locking, & triple-locking features, to suit a wide range of applications.
Gate Opening (mm)
Net Weight (gms)
Min. Breaking Strength (kN)
Silver/Golden Yellow Galvanized
KARAM Energy Absorber PN 300 is made up of 44mm wide webbing and is shrink wrapped. It reduces the impact of fall to less than 6kN, and conforms to EN 355:2002. The minimum fall clearance distance required when using this energy absorber for a 2m lanyard is 6=m.
KARAM offers Rope Grabs made of Steel and incorporated onto the Lifelines of various lengths.These Rope grabs on Lifelines a safe fall protection solution for various applications like-Roof top working, window cleaning, etc.
Physical Parameters General Design -Moving Rope Grab Rg 03 On 0 12 Mm Kernmantle Rope.
-Equipped With Energy Absorber With Steel Karabiner Pn 112 For Attachment With The Harness Of The User
-Moves Along With The User Climbing Up Or Down And Locks Him In The Case Of A Fall
Weight 2730 Gm +- 10 Gm (Rope Grab + Energy Absorber + Karabiner)
Total Weight Of The System Depend On The Length Of Anchor Line
Anchorage Line Pn 905 (K), Pn 910 (K), Pn 920 (K), Pn 930 (K), Pn 940 (K), Pn 950 (K), Pn 960 (K), Pn 970 (K), Pn 980 (K), Pn 990 (K), Pn 9100 (K)
Made Of 0 12 Mm Kernmentle Rope.
Type : Non-Detachable Stainless Steel Fall Arrester on Kernmantle Rope Anchorage Line
Attachment Element : PN 112
Grade : EN 353-2:2002
Model No : PN2004
This Rope grab is Openable, and is constructed of high strength Aluminium Alloy, which is extremely light in weight, and is highly corrosion resistant.
PN 2006 system works on 12mm dia Kernmantle rope anchorage line, without any manual intervention whereas PN 2006(11) system works on 11mm dia Kernmantle rope anchorage line without any manual intervention.
Has a manual lock position to allow work on inclined roof, and also restraint positioning.
The Anchorage line is provided in lengths of 5mtrs to 100mtrs.
PN 2006 has energy absorber at one end and stop knot at other end whereas PN 2006(11) has one side loop and other side a stop knot.
Abrasion resistant thimble to protect the loops from being damaged by metallic contact.
The termination is cross-stitched, and is protected with a strong transparent covering sleeve which not only protects the end but also makes the stitches visible for easy inspection prior to use.
Conforms to EN 353-2:2002.
Made of 3-Strand Polyamide Twisted Rope of dia 14 mm.
One side loop; other side end stop knot. (Also Available with Both Side Loops)
10m Ref. Anchor PN 910
20m Ref. Anchor PN 920
30m Ref. Anchor PN 930
40m Ref. Anchor PN 940
50m Ref. Anchor PN 950
100m Ref. Anchor PN 9100
150m Ref. Anchor PN 9150
200m Ref. Anchor PN 9200
Longer lengths are also available on request
PPE / NO PPE
One of the biggest challenges in fall protection is when the anchorage is too high to access and the clearance distance is too small.
KARAM Retractable Fall Arrester Blocks provide an ideal solution for such a problem.
Model Length Specification Compliance
PN 800 7 ft Fully adjustable telescopic legs, adjustable height from 1.15m to 2.15m
Wheelbase (Footprint) : 1.5m Diameter
Weight : 12.15 kgs
Maximum Load Capacity : 500kg EN 795:2012 TYPE B
PN 800 10 ft Fully adjustable telescopic legs, adjustable height from 1.9m to 3.07m
Wheelbase (Footprint) : 1.7m Diameter
Weight : 16.8 kgs
Maximum Load Capacity : 500kg
• KARAM introduces the new K-Pod which provides a safe and sure system for easy access to confined spaces. The K-Pod is an ideal choice to provide overhead anchorage which can be mounted on different bases and it conforms to EN 795 Class B.
Item Weight 42.0 grams
Material Type Stainless Steel
Number of Items 0
Part Number E_60001516
Material: Aluminium Alloy
Minimum Breaking Strength: 40 kN
Finish: Natural Silver/ Coloured, Anodized
Net Weight: 230gm
Can be used on a rope of dia 16mm
Conforms to EN 12278:2007
Dia Lengths (in meters)
10 mtr 20 mtr 30 mtr
9.0 mm PN 910K(90) PN 920K(90) PN 930K(90)
10.5 mm PN 910K(105) PN 920K(105) PN 930K(105)
11.0 mm PN 910K(110) PN 920K(110) PN 930K(110)
Made up of Polyamide.
Available in various lengths on request.
Maximum Roll Size : 200mts
Available in Diaof : 12mm, 14mm, 16mm